Zero joint edge bander HIT-M 65

All commercially available edges from 0.4 - 3 mm (¹/64 - ¹/8 in) with pre-coated or post-coated functional layer can be processed with the HIT-M.

For bevelled plate edges, the support plate can be swivelled up to 50°.

Especially due to the driven pressure roller of the SA-model, extreme inner radii as from 10 mm can be effortlessly implemented.

A clear arrangement of the control elements makes working with the device simple and intuitive.

By viewing the video, you agree
that your data is transferred to YouTube and that
you have read the privacy policy.

Order number: 9K0001
Delivery specification
- 1 swivelling support plate
- 1 cleaning brush
- 2 locking bolts (short and long)
- 1 hexagon socket 3 mm (¹/8 in)
- 1 hexagon socket 4 mm (3/16 in)
- 1 hexagon socket 5 mm (3/16 in)
- 1 hexagon socket 6 mm (1/4 in)
- 1 connection package 5 m (16,4 ft) (voltage/compressed air)

Nominal voltage	230 V
Nominal power input	4.1 hp
Edge height	3/8 - 2 9/16 in
Tilt range	0 - 50 °
Edge thickness	¹/64 - ¹/8 in
Min. inside radius	7/8 in
Heating time	30 s
Temperature max.	968 ° F
Infinitely variable feed rate	3.3 - 18.0 ft/min
Weight	23.8 lbs
Dimensions (L x W x H)	8 11/16 x 6 5/16 x 14 ³/16 in
Connection compressed air	87 - 145 psi

Optimally suited for larger moulded parts, for example, and for use on the construction site....more

Optimally suited for larger moulded parts, for example, and for use on the construction site.
For panel materials with edge heights of up to 65 mm

For bevelled plate edges, the support plate can be swivelled up to 50°. Automatic edge feed...more

For bevelled plate edges, the support plate can be swivelled up to 50°.
Automatic edge feed with edge detection as stop function.
A clear arrangement of the control elements makes working with the device simple and intuitive.
Connection socket for optionally available foot switch.

The HIT-M is the first and only mobile device for creating an optical zero joint. With the hot...more

The HIT-M is the first and only mobile device for creating an optical zero joint. With the hot air injection technique, all customary zero joint edges with applied functional layer can be processed - without the use of additional adhesive.
The HIT-M can be flexibly used and is ideal for intricate components. Especially with free-forms or tight radii it shows its great strengths.
Perfectly straight, bevelled, curved and round panel materials as well as moulded parts can be processed. Inclined cut surfaces of up to 55° can be easily achieved.
The working temperature is reached a few seconds after switching on the unit. With the HIT-M there is no need for time-consuming colour changes or cleaning of glue pans.