Multi-cutter MF 26 cc

Equipped with the MF-VN 25, the multicutter can produce grooves for risers or service ducts efficiently and quickly.

The MF-AF 90 can be used for routing and folding techniques, as applied in facade construction and with sign boards.

Three slots can be cut in one pass with the MF-SE 3. This quick and simple bending technique is applied to produce curved elements.

The MF-GF 90/15 cuts 90° V-grooves with very little dust; by gluing the cut faces, sturdy corner paneling is produced in just a few steps.

Order number: 917801
Delivery specification
- 1 TCT saw blade 120 x 1,2/1,8 x 20 mm, Z 40, FZ/TR, for fine cuts in wood; Ref. No. 092559
- 1 Aluminum composite cutter MF-AF 90, for 90° V-grooves up to 8 mm deep; Ref. No. 206076
- 1 Parallel guide fence; Ref. No. 206038
- 1 Mains cable 4 m (13.1 ft); Ref. No. 087323
- With aluminum composite cutter MF-AF 90
- Transport and storage box T-MAX

Lengthwise and crosswise grooves V-grooves For routing wallboard prior to folding, bending...more

Turn the adjusting screw to set the cutting depth on the sliding scale with an accuracy of 1/10...more

Turn the adjusting screw to set the cutting depth on the sliding scale with an accuracy of 1/10 mm.
Enhanced precision assured – The glider slides on the surface of the workpiece and thus prevents tilting. It helps to hold the MF 26 cc securely in position when it is mounted on the guide rail as well. When bending and folding aluminum composite panels and wallboard in particular, the glider ensures exact cutting depth accuracy.
The guard opens with a single action. When it is opened, the starting lockout and sawblade lock engage automatically.
With or without a rail – simply turn the pointer to show the exact cutting depth.
With or without a rail – simply turn the pointer to show the exact cutting depth.

The design of the MF 26 cc is characterized by the use of extremely rugged, high-quality and precision-made parts, including the lightweight magnesium die-cast housing and impact-resistant, fiber glass-reinforced plastic components.
The MF 26 cc multi-cutter can be operated to a cutting depth of 26 mm (1 in.) on the guide rail and as a plunge-cut saw.
Whether sawing, routing or cutting grooves, genuine precision is best achieved with the aid of the guide rail system F.
Continuously variable speed up to 6250 rpm. For shaping, sawing and slotting an abundance of different materials.