DuoDoweler DDF 40
Ref. no.:
Master_ddf40
Delivery specification
- 1 auxiliary rest ZA
- 1 set of additional stops ZAG
- 1 hose connector
- 1 position indicator PAZ
- 2 Anti-slip mats, wrapped; Ref. No. 095063
- 1 Bottle for glue 250 ml (without glue); Ref. No. 095059
- 1 Allen key with handle; Ref. No. 093282
- New ergonomic design for easy handling
- Patented alignment system
- Slimline machine with a flat baseplate
Technical data
| Drilling depth | 0 - 40 mm |
| Drilling depth | 0 - 1 9/16 in |
| Drill spacing | 32 mm |
| Drill spacing | 1 1/4 in |
| Chuck Ø | 8 mm |
| Chuck Ø | 5/16 in |
| Tool Ø max. | 12,2 mm |
| Tool Ø max. | 1/2 in |
| Tool Ø min. | 3 mm |
| Tool Ø min. | 1/8 in |
| Tilt range | 0 - 90 ° |
| Nominal No. of strokes – no load | 8000 1/min |
| Nominal power input | 900 W |
| Nominal power input | 1.2 hp |
| Extraction connection diameter | 29 mm |
| Extraction connection diameter | 1 1/8 in |
| Weight | 2,8 kg |
| Weight | 6.2 lbs |
| Dimensions (W x L x H) | 145 x 300 x 164 mm |
| Dimensions (W x L x H) | 5 11/16 x 11 13/16 x 6 7/16 in |
Product details
The DuoDoweler DDF 40 introduces greater ease and efficiency to the task of drilling accurate dowel holes. Its hallmarks are a broad range of applications, a new ergonomic design for easy handling, and absolutely aligned, stable joints.
Whether in the workshop or on site, no other hand-held power tool can produce such high-quality joints.
When producing corner joints, partitions or rows of holes, the DDF 40 offers not only the precision of a stationary machine, but also the cost savings associated with standard wooden dowels.
In addition, the technique of using dowels in pairs already achieves outstanding stability at the dry assembly stage.
Applications
- All types of joints from 3 - 12 mm (1/8 in. - 1/2 in.)
- Rows of holes
- Drilling for fittings/hardware
- Ideal for carcass and staircase construction in the workshop and on site
- Compatible materials include solid wood and board materials
Advantages
- The rotary knob and scale allow the tilting fence to be accurately repositioned up to a height of 62 mm (2 7/16 in.) . Regularly occurring dimensions can be preset by way of the turret.
- Two spring-loaded pins in the baseplate enable the user to drill holes at a fixed distance of 15,5 mm (5/8 in.) from the edge of the work; repetitive drilling without any measuring or marking is simple.
- The ergonomic motor housing, with a molded grip at the front and a hump at the rear, gives the operator a perfect hold no matter what the job, while ensuring the ideal transmission of force to the machine.
- The tilting fence is located on two columns and fastened with a single adjusting screw. For miter joints, it tilts continuously from 0 through 90 degrees. Indexing stops are provided at 22.5°, 45° and 67.5°.
Videos
Downloads / Safety notes
Accessories / Tools
