Carpenter´s Chain Saw ZSX Ec / 400 Q
- 1 Parallel fence; Ref. No. 204591
- 2 Saw chain 3/8“ 400 P for ZSX Ec / 400 Q; ref. No. 006974
- 1 Combination screw driver 6 mm; Ref. No. 093272
- 1 Mains cable 10 m (32.8 ft); Ref. No. 087612
- boxed
SEK 58,179.00*
Selling and shipping is done by the Mafell specialist dealer. The Mafell specialist dealer can be selected during the ordering process.
Overview of the Mafell specialist dealers
Delivery time: appr. 10 - 14 workdays
Technical data
| Cutting depth | 400 mm |
| Cutting depth | 15 3/4 in |
| Cutting depth at 45° | 282 mm |
| Cutting depth at 45° | 11 1/8 in |
| Cutting depth at 60° | 199 mm |
| Cutting depth at 60° | 7 13/16 in |
| Weight | 14,1 kg |
| Weight | 31.1 lbs |
| Tilts in both directions | -60° - +60° ° |
| Nominal No. of strokes – no load | 3000-3600 1/min |
| Nominal power input | 3000 W |
| Nominal power input | 4.0 hp |
| Universal motor | 230 V / 50 Hz |
Product details
MAFELL´s unique chain guide system ensures consistent accurate cuts.
The ZSX Ec can be tilted on both sides to 60°. The ability to precisely set a wide range of working angles in opposing directions offers maximum convenience.
The generously dimensioned and adjustable chip ejector performs extremely efficiently.
The generously dimensioned and adjustable chip ejector performs extremely efficiently.
Automatic chain lubrication with adjustable speed to eliminate oil spillage on timber.
Like all our portable circular carpentry saws, the ZSX Ec also uses our guide rail system.
Equally adapted for operation by either right-handed or left-handed users. The ergonomically designed handle and switch arrangement always applies the feed pressure at right angles to the support.
Applications
- Cross-cutting and rip cuts
- Bevel cuts up to 60°
- General joining work
- Compound miter cuts up to 60°
- Compatible materials include solid wood, laminated beams, insulating materials
Advantages
- 3000 W CUprex motor, optimized digital electronics and newly developed control technology.
- The universal guide support for very precise individual machining operations such as notch and purlin cuts is available as an optional accessory.
- Excellent handling and optimum convenience - thanks to light weight and a built-in start-up lock.
- Twin-guide tilt adjustment - for precise angle cuts.
- Excellent cutting results - thanks to MAFELL special saw chain.
Usage
Videos
Downloads / Safety notes
Accessories / Tools
Accessories / Tools
Guide rail F 80
0,8 m (2,6 ft) long
Guide rail F 110
1.1 m (3.6 ft) long
Guide rail F 160
1.6 m (5.2 ft) long
Guide rail F 210
2,1 m (6,9 ft) long
Guide rail F 310
3,1 m (10,2 ft) long
Connecting piece F-VS
for joining two guide rails
Guide pocket F 160
for guide rails up to 1,6 m
Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + TZ-FST1600
Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long
Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long
Glider
For height adjustment when working with a guide rail
Guide rail
length 3 m (9.8 ft) (2 pieces with connecting piece)
Guide rail
length 3 m (9.8 ft) (one piece)
Guide rail extension
length 1,5 m (4.9 ft)
Adapters (pair)
for parallel guide fence
Carbide-tipped fine-cut saw chains HM 260
for ZSX Ec / 260 HM
Carbide-tipped fine-cut saw chains HM 400
for ZSX Ec / 400 HM
Replacement chain, left
Replacement chain, right
Saw chain 3/8"400 P
for rip cuts and cross-cutting
Guide rail 260 HM for 006968
for 006968, 006972
Guide rail 400 HM for 006972
for 006972
Guide rail 400 3/8"
for 006974
Riving knife 260 for 006968
for 006968
Riving knife 400 for 006972, 006971, 006974
for 006974, 006972
Sprocket HM for 006968
for 006968, 006972
Sprocket 3/8" for 006971, 006974
for 006974
Universal guide support
Adapter for trolley ZSX Ec
