go to website

DSS 300 cc + S 200, S 35 M, S 200-MH, D35

: DSS 300 cc + S 200, S 35 M, S 200-MH, D35 Insulation saw DSS 300 cc : Perfect interaction of all system components and innovative details, including the cutting wire, carbon guide fin and chip sweepers, achieve a high-precision cut. : Insert a track clamp in both ends of the guide track, offer up the track and press the tips into the material. Attach the glider, offer up the DSS 300 cc, make the cut and the job’s done. : Flexible materials, as used to insulate the space between studs for example, can be cut quickly and accurately with the DSS 300 cc as well. : For exact bevel cuts, the DSS 300 cc can be continuously pivoted through 60° referencing the scale. To make the cut, use an auxiliary rest on or alongside the guide track. : Detach the double-sided toothed belt and lower the pulley. Thanks to the unique cutting wire, the DSS 300 cc can cut in practically any direction. : Attach the guide track to the long side of the opening. Cut the short side freehand, following a mark. Cut the long side by running the tip of the base plate along the guide track.
DSS 300 cc + S 200, S 35 M, S 200-MH, D35 Insulation saw DSS 300 cc
DSS 300 cc + S 200, S 35 M, S 200-MH, D35 Insulation saw DSS 300 cc
Perfect interaction of all system components and innovative details, including the cutting wire, carbon guide fin and chip sweepers, achieve a high-precision cut.
Perfect interaction of all system components and innovative details, including the cutting wire, carbon guide fin and chip sweepers, achieve a high-precision cut.
Insert a track clamp in both ends of the guide track, offer up the track and press the tips into the material. Attach the glider, offer up the DSS 300 cc, make the cut and the job’s done.
Insert a track clamp in both ends of the guide track, offer up the track and press the tips into the material. Attach the glider, offer up the DSS 300 cc, make the cut and the job’s done.
Flexible materials, as used to insulate the space between studs for example, can be cut quickly and accurately with the DSS 300 cc as well.
Flexible materials, as used to insulate the space between studs for example, can be cut quickly and accurately with the DSS 300 cc as well.
For exact bevel cuts, the DSS 300 cc can be continuously pivoted through 60° referencing the scale. To make the cut, use an auxiliary rest on or alongside the guide track.
For exact bevel cuts, the DSS 300 cc can be continuously pivoted through 60° referencing the scale. To make the cut, use an auxiliary rest on or alongside the guide track.
Detach the double-sided toothed belt and lower the pulley. Thanks to the unique cutting wire, the DSS 300 cc can cut in practically any direction.
Detach the double-sided toothed belt and lower the pulley. Thanks to the unique cutting wire, the DSS 300 cc can cut in practically any direction.
Attach the guide track to the long side of the opening. Cut the short side freehand, following a mark. Cut the long side by running the tip of the base plate along the guide track.
Attach the guide track to the long side of the opening. Cut the short side freehand, following a mark. Cut the long side by running the tip of the base plate along the guide track.

By viewing the video, you agree
that your data is transferred to YouTube and that
you have read the privacy policy.
 

               

Delivery specification:

  • Order number: DEAL42
  • Delivery specification
    • 1 Insulation saw DSS 300 cc
    • 2 Cutting wires, 6 mm wide
    • 1 Double-sided toothed belt
    • 1 Auxiliary rest/glider
    • 2 Cable cover K-Fix
    • 1 Mains cable 4 m (13.1 ft)
    • ---- ADDITIONAL ARTICLE ----
    • 1 High-capacity extractor S 200; Ref. No. 206869
    • 1 Dust extractor S 35 M; Ref. no. 91C401
    • 1 Machine holder S200-MH; Ref. No. 207164
    • 1 Hand-held extraction set D 35; Ref. No. 093718
    • in carrying case
Technical Data Applications Advantages Description Download More information
Technical Data
Cutting depth306 mm
Cutting depth at 45°206,5 mm
Cutting depth at 60°142 mm
Cutting width6 mm
Tilt range60 °
Tilting range to rear45 °
Nominal No. of strokes – no load4700 1/min
Nominal power input1800 W
Extraction connection diameter35 mm
Weight8,25 kg
Universal motor230 V / 50 Hz
Applications
Rip cuts and cross-cutting Bevel cuts Compatible materials include: Wood fiber insulation...
  • Rip cuts and cross-cutting
  • Bevel cuts
  • Compatible materials include: Wood fiber insulation board (pressure-resistant, flexible), PUR rigid foam (without underlay),Styropor EPS, Styrodur XPS
Advantages
2-Dimensional tilting - The DSS 300 cc can cut at tilt angles up to 60°. In addition, the...
  • 2-Dimensional tilting - The DSS 300 cc can cut at tilt angles up to 60°. In addition, the cutting wire and riving knife can be tilted back through 45°.
  • The carbon guide fin achieves extreme rigidity and, thanks to reduced weight, delivers the required cutting precision.
  • Automatic wire tensioning ensures consistency and supreme cutting quality.
  • The CUprex highperformance motor stands for sheer strength and outstanding motive power.
  • The double-sided toothed belt convey chips and dust away from the kerf and improve both extractor performance and cutting precision.
Description
The MAFELL DSS 300 cc is a unique wire saw for cutting pressureresistant and flexible wood fiber...
  • The MAFELL DSS 300 cc is a unique wire saw for cutting pressureresistant and flexible wood fiber insulating materials. Precision cutting for a perfect fit improves building insulation, eliminates thermal bridges and thus prevents structural damage. The DSS 300 cc is instrumental in ensuring that insulation work is performed with the utmost efficiency.
  • Perfect interaction of all system components and innovative details, including the cutting wire, carbon guide fin and chip sweepers, achieve a high-precision cut. This integrated system, which also includes the high-capacity extractor S 200 and workbench ST 1700 Vario, is simply unbeatable.
  • Given the appropriate accessories, insulating materials can be cut precisely in an almost infinite number of ways. The compact and highly flexible workbench allows you to work with extreme accuracy, even when making very long cuts. A more pleasant working atmosphere and ease of handling are ensured by the powerful high-capacity extractor.
Downloads
https://dss300cc.mafell.de/en
Accessories 25
Accessories 25
Angle fence F-WA Angle fence F-WA
Order number: 205357
Guide rail F 80 0,8 m (2,6 ft) long Guide rail F 80 0,8 m (2,6 ft) long
Order number: 204380
Guide rail F 110 1.1 m (3.6 ft) long Guide rail F 110 1.1 m (3.6 ft) long
Order number: 204381
Guide rail F 160 1.6 m (5.2 ft) long Guide rail F 160 1.6 m (5.2 ft) long
Order number: 204365
Guide rail F 210 2,1 m (6,9 ft) long Guide rail F 210 2,1 m (6,9 ft) long
Order number: 204382
Guide rail F 310 3,1 m (10,2 ft) long Guide rail F 310 3,1 m (10,2 ft) long
Order number: 204383
Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long
Order number: 204376
Guide pocket F 160 for guide rails up to 1,6 m Guide pocket F 160 for guide rails up to 1,6 m
Order number: 204626
Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ 180 MM + TZ-FST1600 Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ...
Order number: 209591
Guide pocket set F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + TZ-FST1600 Guide pocket set F 80 + F 160 + F-WA + F-VS + 2...
Order number: 209592
Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long
Order number: 204375
End cap F-EK 2 pieces End cap F-EK 2 pieces
Order number: 205400
Parallel guide fence Parallel guide fence
Order number: 205323
Machine holder S200-MH Machine holder S200-MH
Order number: 207164
Double-sided toothed belt DSS-DZ Double-sided toothed belt DSS-DZ
Order number: 206371
Cable cover K-Fix 2 pieces Cable cover K-Fix 2 pieces
Order number: 206369
Track clamp F-FIX 2 pieces Track clamp F-FIX 2 pieces
Order number: 206760
Chip bag S 200 2 pieces Chip bag S 200 2 pieces
Order number: 093791
Guide unit ST-FE 200 incl. guide track, mounting bracket and auxiliary rest Guide unit ST-FE 200 incl. guide track,...
Order number: 207277
High-capacity extractor S 200 High-capacity extractor S 200
Order number: 206869
Lever clamp F-SZ 180MM 2 pieces, for fixing guide rail to workpiece Lever clamp F-SZ 180MM 2 pieces, for fixing...
Order number: 207770
Roller edge guide K 85-UA Roller edge guide K 85-UA
Order number: 205166
Cutting wire DSS-SR incl. 2 sweeper and 1 pulley guard Cutting wire DSS-SR incl. 2 sweeper and 1...
Order number: 206370
Workbench ST 1700 Vario Workbench ST 1700 Vario Workbench ST 1700 Vario
Order number: 91A601
Connecting piece F-VS for joining two guide rails Connecting piece F-VS for joining two guide rails
Order number: 204363