Cross-Cutting System KSS 50 cc

: One-stop solution: with the cross-cutting system, the machine is permanently attached to the guide track.

: The highly graduated scale permits very precise angle setting.

: The fixed and adjustable stops on the underside of the rail allow the system to be used for angle cuts from +60° to -60°.

: Thanks to the generously-sized angle scale, miter cuts always ensure a perfect fit – as seen here with exterior cladding.

Cross-Cutting System KSS 50 cc

One-stop solution: with the cross-cutting system, the machine is permanently attached to the guide track.

The highly graduated scale permits very precise angle setting.

The fixed and adjustable stops on the underside of the rail allow the system to be used for angle cuts from +60° to -60°.

Thanks to the generously-sized angle scale, miter cuts always ensure a perfect fit – as seen here with exterior cladding.

Product nr.: 918901
Delivery specification
- 1 Allen key 5 mm; Ref. No. 093034
- 1 Guide track M, max. cutting length 400 mm (15 3/4 in.); Ref. No. 208170
- 1 Mains cable 4 m (13.1 ft); Ref. No. 087323
- boxed

10 230,00 kr

incl. 25 % VAT (SE) plus 100 SEK shipping cost (up to an order value of 5500 SEK)

Selling and shipping is done by the Mafell specialist dealer. The Mafell specialist dealer can be selected during the ordering process.
Overview of the Mafell specialist dealers

Delivery time: appr. 10 - 14 workdays

mehr

Menü schließen

Cutting depth at 0° with guide track	0 - 52 mm
Cutting depth 45° with track	0 - 42 mm
Cutting depth at 0 ° without guide track	0 - 58 mm
Cutting depth 45° without guide track	0 - 48 mm
Tilt range	0 - 45 °
Cutting length	407 mm
Angle cuts	-60 - +60 °
Nominal No. of strokes – no load	5700 1/min
Nominal power input	1300 W
Weight with guide rail	5.4 kg
Universal motor	230 V / 50 Hz

Cross cuts with guide Rip cuts and cross-cutting Plunge cuts and recesses Compatible...mehr

Menü schließen

Cross cuts with guide
Rip cuts and cross-cutting
Plunge cuts and recesses
Compatible materials include solid wood, board materials, insulating materials, doors, worktops and internal finishing and renovation materials

Thanks to the unique tilting system, a cutting depth of 42 mm (including rail) is always...mehr

Menü schließen

Thanks to the unique tilting system, a cutting depth of 42 mm (including rail) is always available in the angle range from 0° to 45°.
The machine can be removed from the cross-cut track at the single press of a button, allowing its use for the full range of applications offered by the K 55 cc.
The rubberized underside ensures a good grip on the work and avoids damage to the surface.
Bright LEDs illuminate a large working area.

With their low weight and cutting depths of up to 52 mm on the track, MAFELL’s new, powerful...mehr

Menü schließen

With their low weight and cutting depths of up to 52 mm on the track, MAFELL’s new, powerful cross-cutting systems are making a big impact when it comes to interior work, for example.
Once the cut has been executed, the saw automatically returns to the starting position. The maximum cutting length, exploiting the full cutting depth, is 407 mm.
It is no longer necessary to unscrew the riving knife – the FLIPPKEIL offers you optimum user-friendliness and safety when plunge cutting.

Menü schließen