Carpenter's Chain Saw ZSX TWIN Ec

: Especially precise, guided cuts are easy to execute because the ZSX-TWIN Ec is compatible with the existing MAFELL guide rail system F.

: Perfect height adjustment. The Pertinax glider allows a compensating adjustment to be made for the thickness of the guide rail.

: Since a large volume of chips can be produced at cutting depths of up to 400 mm (15 3/4 in.), the ZSX-TWIN Ec can also be used in conjunction with an extraction system.

: In addition to the extensive special accessories that are already available for the ZSX 400 / HM, a specially developed carbide-tipped ripping chain delivers perfect results.

Carpenter's Chain Saw ZSX TWIN Ec

Especially precise, guided cuts are easy to execute because the ZSX-TWIN Ec is compatible with the existing MAFELL guide rail system F.

Perfect height adjustment. The Pertinax glider allows a compensating adjustment to be made for the thickness of the guide rail.

Since a large volume of chips can be produced at cutting depths of up to 400 mm (15 3/4 in.), the ZSX-TWIN Ec can also be used in conjunction with an extraction system.

In addition to the extensive special accessories that are already available for the ZSX 400 / HM, a specially developed carbide-tipped ripping chain delivers perfect results.

Product nr.: 961601
Delivery specification
- 1 Carbide-tipped ripping chain TWIN HM 400; Ref. No. 006977
- 1 Carbide-tipped fine sawing chain HM 400; Ref. No. 006972
- 1 Trolley ZSX-TWIN Ec
- 1 Glider for use with guide rail; Ref. No. 205934
- 1 Parallel fence; Ref. No. 204591
- 1 Combination screw driver 6 mm; Ref. No. 093272
- 1 Open-end spanner 13 mm; Ref. No. 093008
- 1 Mains cable 10 m (32.8 ft); Ref. No. 087906
- Trolley included in delivery specification

169 936,25 kr

incl. 25 % VAT (SE) plus 100 SEK shipping cost (up to an order value of 5500 SEK)

Selling and shipping is done by the Mafell specialist dealer. The Mafell specialist dealer can be selected during the ordering process.
Overview of the Mafell specialist dealers

Delivery time: appr. 10 - 14 workdays

mehr

Menü schließen

Cutting depth	400 mm
Cutting depth at 15°	386 mm
Cutting depth at 30°	346 mm
Cutting depth at 45°	282 mm
Cutting depth at 60°	199 mm
Tilts in both directions	-15 - +60 °
Nominal No. of strokes – no load	3600 1/min
Nominal power input	2 x 3000 W
Weight	24.2 kg
Universal motor	230 V / 50 Hz

Rip cuts and cross-cutting Recesses Compatible materials include solid wood and laminated...mehr

Menü schließen

Rip cuts and cross-cutting
Recesses
Compatible materials include solid wood and laminated beams

Despite tremendous nominal output of 6000 Watt, the single-phase ZSX-TWIN Ec weighs just 20 kg...mehr

Menü schließen

Despite tremendous nominal output of 6000 Watt, the single-phase ZSX-TWIN Ec weighs just 20 kg (44.1 lbs). The low weight-to-power ratio allows the saw to cut as deep as 400 mm (15 3/4 in.).
In timber construction and when fitting solid timber walls, corners frequently need to be cut out. Thanks to the vertical cutting edge, recesses and half-lap joints can be produced quickly and exactly. The arduous task of turning the work simply does not arise.
At the core of the MAFELL ZSX-TWIN Ec are the two 3000-Watt single-phase motors. They run at the same time on two 230 V phases of the three-phase electric power system.
The ZSX pivots from -15° to 60° exactly according to the scale.

mehr

Menü schließen

The ZSX-TWIN Ec carpenter´s chain saw is a highly practical tool for large timbers.
By developing a machine with two motors, capable of producing very complex and otherwise laborious work easily and for a perfect fit, MAFELL has taken the chain saw to a new level.
With a nominal output of 3000 Watt, just one CUprex motor already tests the performance limits of the conventional 230 V power supply. Two CUprex motors running at the same time would bring a regular fused domestic power system to its knees. By dividing the load between two circuits, the twin-motor ZSX gets all the power it needs. A three-phase electric power system offers the ideal solution because the phases have separate fuses, so that the supply is not overloaded.

Menü schließen