Milling templates Arunda Class N

: Dovetailed joints on floor joists or rafter (roof system).

: Perpendicular or angled joints on floor joists or rafter (roof system).

: Speed: 8 to 18 mortise/tenon joints per hour.

: The Arunda system is delivered in a practical wooden box.

Milling templates Arunda Class N

Dovetailed joints on floor joists or rafter (roof system).

Perpendicular or angled joints on floor joists or rafter (roof system).

Speed: 8 to 18 mortise/tenon joints per hour.

The Arunda system is delivered in a practical wooden box.

Product nr.: 91A706
Delivery specification
- 1 pair of jigs
- 1 burr milling cutter
- 1 guide ring
- 1 expensions plate; Ref. No. 093782
- 1 positioning gauge
- 2 pairs of blades
- 1 wooden box

36 740,00 kr

incl. 25 % VAT (SE) plus 100 SEK shipping cost (up to an order value of 5500 SEK)

Selling and shipping is done by the Mafell specialist dealer. The Mafell specialist dealer can be selected during the ordering process.
Overview of the Mafell specialist dealers

Delivery time: appr. 10 - 14 workdays

mehr

Menü schließen

Tenon on timber width	50 - 100 mm
Timber height	90 - 33 mm
Timber section	40 x 90 - 100 x 330 mm

dovetailed wood-to-wood joints Perpendicular or angled joints on floor joists or rafter (roof...mehr

Menü schließen

dovetailed wood-to-wood joints
Perpendicular or angled joints on floor joists or rafter (roof system).
Just as easy to use in the work-shop as on the job site.

Push-down dovetail assembly is very fast and easy. No need to pull apart the load-bearing beams...mehr

Menü schließen

Push-down dovetail assembly is very fast and easy. No need to pull apart the load-bearing beams to insert tenons.
Double-cone self-tightening joints.
Identical router bit setting to cut both mortise and tenon.

Arunda is a system for manually making dovetailed wood-to-wood joints to assemble timber frame...mehr

Menü schließen

Arunda is a system for manually making dovetailed wood-to-wood joints to assemble timber frame structures.
All you need is a pair of Arunda jigs (one for the tenon and the other for the mortise),a powerful Mafell router LO 65 Ec equipped with the special Arunda cutter and some accessories.
There are several models available but only one size will be selected to fit your most commonly used timber widths. Keep in mind: The bigger the joint, the greater and better its resistance!

Menü schließen

https://marketing.mafell.de/arunda-berechnung/lang,en/