Milling motor FM 1650 NC-LO

: Highest concentricity due to the filigree coordination of all components and the fact that armature and spindle are manufactured and balanced from one piece.

: Fastening is possible via the clamping collar or alternatively via direct screw connection on the portal.

: Duo-In: The speed can be continuously adjusted to any application, either manually or via the portal interface. Additional LED status display.

: The spindle can be locked via the push button or by means of an open-ended wrench at the flat areas of the spindle.

Milling motor FM 1650 NC-LO

Highest concentricity due to the filigree coordination of all components and the fact that armature and spindle are manufactured and balanced from one piece.

Fastening is possible via the clamping collar or alternatively via direct screw connection on the portal.

Duo-In: The speed can be continuously adjusted to any application, either manually or via the portal interface. Additional LED status display.

The spindle can be locked via the push button or by means of an open-ended wrench at the flat areas of the spindle.

Product nr.: 9M1801
Delivery specification
- 1 collet chuck OZ 12, 8 mm (5/16 in.)
- 1 Open-ended spanner
- 1 NC control cable M8 / 4-pol, 5 m
- 1 Mains cable 4 m (13.1 ft)
- Spindle lock
- External portal interface
- Made in Germany
- LED indication for overload

7 768,75 kr

incl. 25 % VAT (SE) plus 100 SEK shipping cost (up to an order value of 5500 SEK)

Selling and shipping is done by the Mafell specialist dealer. The Mafell specialist dealer can be selected during the ordering process.
Overview of the Mafell specialist dealers

Delivery time: appr. 10 - 14 workdays

mehr

Menü schließen

Nominal power input	1650 W
Universal motor	230 V / 50 Hz
Nominal No. of strokes – no load	4.000 - 23.000 1/min
NC - Portal connection	M8 / 4-pol.
Portal control	0 - 10 V
Portal mounting (drill holes)	6 x M6
Clamping collar	43 mm
Clamping chuck	8 mm
Dimensions (L x W x H)	346 x 98 x 86 mm
Noise level dB(A)	85
Weight	3.22 kg

Model making, mould making, advertising technology, engraving,jewellery, electronics,...mehr

Menü schließen

Model making, mould making, advertising technology, engraving,jewellery, electronics, stonemasonry
Ideally suited for portal milling machines, cutting tables, grinding devices and flexible shafts, drive motor for sawing and milling tables
For wood, metal, plastics, foam, polystyrene, stone

Duo-In: The speed can be continuously adjusted to any application, either manually or via the...mehr

Menü schließen

Duo-In: The speed can be continuously adjusted to any application, either manually or via the portal interface. Additional LED status display.
Fastening is possible via the clamping collar or alternatively via direct screw connection on the portal.
The MAFELL milling motors are manufactured under the strictest quality controls in the German town of Oberndorf a. N. Before delivery, each milling motor is “run in” in a test cabin. This increases the tool life and the service life.
Highest concentricity due to the filigree coordination of all components and the fact that armature and spindle are manufactured and balanced from one piece.
The spindle can be locked via the push button or by means of an open-ended wrench at the flat areas of the spindle.
The labyrinth seal permanently protects the spindle and bearing from even the smallest particles, dust and chips.

With the FM 1650 NC-LO, MAFELL has developed another milling motor “Made in Germany”. The high...mehr

Menü schließen

With the FM 1650 PV-LO, MAFELL has developed another milling motor “Made in Germany”. The high quality standard and well thought-out details make the MAFELL milling motor the best partner in its performance class.
The speed can be infinitely adjusted to any application. In addition, the digital electronics are equipped with soft start, constant speed under load, idle speed reduction and overload protection.

Menü schließen

Operating instructions

Brochure

Menü schließen

https://fm.mafell.de/en