Back to website

Cross-Cutting System KSS 300 MidiMAX in T-MAX

Cross-Cutting System KSS 300
Fastening the portable circular saw to the KSS rail creates a very practical single-handed cross-cutting system.
One system, five saws, one case: the KSS 300 can be used as a cross-cut saw, plunge-cut saw, shadow gap saw or portable circular saw with or without the Flexi-Guide FX 140 for extra guidance when cutting.
In combination with the roll-up Flexi-Guide FX 140, precise guided cuts up to 1.4 m (4.6 ft) long can be executed with consummate ease.
Perfect edging: the circular saw's spacers enable you easily to make exact expansion joint cuts with widths from 13 mm (1/2 in.).

Mit dem Aufruf des Videos erklären
Sie sich einverstanden, dass Ihre Daten an YouTube
übermittelt werden und dass Sie die Datenschutzerklärung
gelesen haben.

Ausführung:

  • 916701
    • 1 TCT saw blade 120 x 1,2/1,8 x 20 mm, (4 3/4 in.) 40 flat/trapezoidal teeth; Ref. No. 092559
    • 1 Parallel guide fence; Ref. No. 203180
    • 1 Hose connector; Ref. No. 203782
    • 1 Allen key 4 mm; Ref. No. 093074
    • 1 Mains cable 4 m (13.1 ft); Ref. No. 087323
    • Transport and storage box T-MAX
Cutting depth at 0° with guide track0 - 40 mm
Cutting depth 45° with track0 - 27 mm
Cutting depth at 0 ° without guide track0 - 42 mm
Tilt range0 - 45 °
Cutting length300 mm
Angle cuts-60 - +60 °
Nominal No. of strokes – no load8800 1/min
Nominal power input900 W
Weight with guide rail3,0 kg
Universal motor230 V / 50 Hz
Cross cuts with guide Rip cuts and cross-cutting Plunge cuts, recesses and cutting shadow...
  • Cross cuts with guide
  • Rip cuts and cross-cutting
  • Plunge cuts, recesses and cutting shadow gaps from 13 mm (1/2 in.)
  • Compatible materials include board materials, doors, worktops, parquet and laminate flooring, cladding
The pivot point of the KSS 300 is on the side, on the bottom edge of the rail. This has the...
  • The pivot point of the KSS 300 is on the side, on the bottom edge of the rail. This has the advantage of requiring only a single tracing pointer for all angles – with or without the rail.
  • Enables you to detach the machine from the rail in a single, quick action. The saw can then be used as a separate portable circular unit with all the functionality of the MAFELL KSP series.
  • The smart stop and adjustable fence with large scale increments for exact angle settings facilitate very precise and consistent miter cuts.
KSS 300
  • In internal finishing, one thing is important above all else: precision. Designed for supreme handling, the KSS 300 cross-cutting system therefore focuses on all the key functions for this type of work.
  • Fastening the portable circular saw to the KSS rail creates a very practical single-handed cross-cutting system for bevel and miter cuts; once the cut has been executed, the saw automatically returns to the starting position.
  • Offering a maximum cutting depth of 42 mm, the portable circular saw delivers ample power in all situations. Thanks to magnesium die-cast components, this especially neat and lightweight saw weighs only 2.4 kg (5.3 lbs).
  • The entire, compact sawing system is accommodated in the T-MAX carrying case - it is an ideal tool for shadow gaps, rip, bevel, plunge and angled cuts, as well as free-hand work.