Milling templates Arunda 50B Maxi
- 1 pair of jigs
- 1 burr milling cutter
- 1 guide ring
- 1 expensions plate; Ref. No. 093782
- 1 positioning gauge
- 2 pairs of blades
- 1 wooden box
- Class B with fixed 90° fences
- Up to 2’100 kg (4’620 lbs)
- Timber widths from 40 to 300 mm (1 3/4 to 12 inch)
SEK 22,836.00*
Selling and shipping is done by the Mafell specialist dealer. The Mafell specialist dealer can be selected during the ordering process.
Overview of the Mafell specialist dealers
Delivery time: appr. 10 - 14 workdays
Technical data
| Tenon on timber width | 50 - 100 mm |
| Tenon on timber width | 1 15/16 - 3 15/16 in |
| Timber height | 90 - 330 mm |
| Timber height | 3 1/2 - 13 in |
| Timber section | 40 x 90 - 100 x 330 mm |
| Timber section | 1 3/4 x 3 1/2 - 4 x 13 in |
Product details
Arunda is a system for manually making dovetailed wood-to-wood joints to assemble timber frame structures.
All you need is a pair of Arunda jigs (one for the tenon and the other for the mortise),a powerful Mafell router LO 65 Ec equipped with the special Arunda cutter and some accessories.
There are several models available but only one size will be selected to fit your most commonly used timber widths. Keep in mind: The bigger the joint, the greater and better its resistance!
Applications
- dovetailed wood-to-wood joints
- Perpendicular or angled joints on floor joists or rafter (roof system).
- Just as easy to use in the work-shop as on the job site.
Advantages
- Push-down dovetail assembly is very fast and easy. No need to pull apart the load-bearing beams to insert tenons.
- Double-cone self-tightening joints.
- Identical router bit setting to cut both mortise and tenon.
Usage