Zero joint edge bander HIT-M 103 SA

By viewing the video, you agree
that your data is transferred to YouTube and that
you have read the privacy policy.

Zero joint edge bander HIT-M 103 SA Zero joint edge bander HIT-M

All commercially available edges from 0.4 - 3 mm (¹/64 - ¹/8 in) with pre-coated or post-coated functional layer can be processed with the HIT-M.

For bevelled plate edges, the support plate can be swivelled up to 50°.

Especially due to the driven pressure roller of the SA-model, extreme inner radii as from 10 mm can be effortlessly implemented.

A clear arrangement of the control elements makes working with the device simple and intuitive.

By viewing the video, you agree
that your data is transferred to YouTube and that
you have read the privacy policy.

Order number: 9K0004
Delivery specification
- 1 swivelling driven roller
- 1 swivelling support plate
- 1 cleaning brush
- 2 locking bolts (short and long)
- 1 hexagon socket 3 mm (¹/8 in)
- 1 hexagon socket 4 mm (3/16 in)
- 1 hexagon socket 5 mm (3/16 in)
- 1 hexagon socket 6 mm (1/4 in)
- 1 connection package 5 m (16,4 ft) (voltage/compressed air)

Nominal voltage	230 Volt
Nominal power input	3050 Watt
Edge height	10 - 103 mm
Tilt range	0 - 50 °
Edge thickness	0,4 -3,0 mm
Min. inside radius	10 mm
Heating time	30 s
Temperature max.	520 ° C
Infinitely variable feed rate	1 - 5,5 m/min
Connection compressed air	6 - 10 bar
Weight	10,9 kg
Dimensions (L x W x H)	220 x 160 x 400 mm

Optimally suited for larger moulded parts, for example, and for use on the construction site....

Optimally suited for larger moulded parts, for example, and for use on the construction site.
For panel materials with edge heights of up to 103 mm

For bevelled plate edges, the support plate can be swivelled up to 50°. Automatic edge feed...

For bevelled plate edges, the support plate can be swivelled up to 50°.
Automatic edge feed with edge detection as stop function.
A clear arrangement of the control elements makes working with the device simple and intuitive.
Connection socket for optionally available foot switch.

The HIT-M is the first and only mobile device for creating an optical zero joint. With the hot...

The HIT-M is the first and only mobile device for creating an optical zero joint. With the hot air injection technique, all customary zero joint edges with applied functional layer can be processed - without the use of additional adhesive.
The HIT-M can be flexibly used and is ideal for intricate components. Especially with free-forms or tight radii it shows its great strengths.
Perfectly straight, bevelled, curved and round panel materials as well as moulded parts can be processed. Inclined cut surfaces of up to 55° can be easily achieved.
The working temperature is reached a few seconds after switching on the unit. With the HIT-M there is no need for time-consuming colour changes or cleaning of glue pans.