MT 55 cc + guide rail F 160

: The MT 55 cc comes into its own, for example, when executing high-precision plunge cuts in kitchen worktops.

: MAFELL offers the fastest blade change worldwide. Simply press release button and lift lever. Housing opens and allows you to change the blade in a matter of seconds, without any risk of damaging the teeth.

: The saw is easy to use on other track systems as well.

: With or without rail – simply turn the pointer to show the exact cutting depth.

MT 55 cc + guide rail F 160

The MT 55 cc comes into its own, for example, when executing high-precision plunge cuts in kitchen worktops.

MAFELL offers the fastest blade change worldwide. Simply press release button and lift lever. Housing opens and allows you to change the blade in a matter of seconds, without any risk of damaging the teeth.

The saw is easy to use on other track systems as well.

With or without rail – simply turn the pointer to show the exact cutting depth.

Mit dem Aufruf des Videos erklärst du dich

Product nr.: DEAL02
Delivery specification
- 1 Plunge-Cut Saw MT 55 cc MidiMAX in the T-MAX
- 1 Allen key 5 mm; Ref. No. 093034
- 1 TCT sawblade 162 x 1.2/1.8 x 20 mm, 48 alternating teeth, for universal use with board materials; Ref. no. 092584
- 1 Mains cable 4 m (13.1 ft); Ref. No. 087323
- ---- ADDITIONAL ARTICLE ----
- 1 Guide rail F 160; Ref. No. 204365
- with guide rail F 160 included in delivery scope
- Transport and storage box T-MAX

Dealer information: 917602, 204365, 1P0260

6 861,25 kr 9 968,75 kr (31,17% Saved)

incl. 25 % VAT (SE) plus 100 SEK shipping cost (up to an order value of 5500 SEK)

Selling and shipping is done by the Mafell specialist dealer. The Mafell specialist dealer can be selected during the ordering process.
Overview of the Mafell specialist dealers

Delivery time: appr. 10 - 14 workdays

mehr

Menü schließen

Cutting depth	0 - 57 mm
Cutting depth at 45°	0 - 40,5 mm
Tilt range	-1 - +48 °
Nominal No. of strokes – no load	3600-6250 1/min
Nominal power input	1400 W
Universal motor	230 V / 50 Hz
Weight	4.5 kg

Cross-cutting and rip cuts Bevel cuts -1 to +48° Plunge cuts Compatible materials include...mehr

Menü schließen

Cross-cutting and rip cuts
Bevel cuts -1 to +48°
Plunge cuts
Compatible materials include solid wood, cement fiberboard, melamine resin panels (Trespa), OSB, gypsum fiberboard, plastics, façade boards and various board materials

Facility for extremely fine adjustment of the cutting depth setting, e.g. when working with a...mehr

Menü schließen

Facility for extremely fine adjustment of the cutting depth setting, e.g. when working with a resharpened blade or with Fermacell.
The closed saw blade cover and the slide bar at the saw-cut ensure a very low dust formation.
The MT 55 cc is equipped with a new CUprex-Compact motor for significantly elevated speeds and ample power in reserve.
The cutting depth can be set with millimeter precision. With or without a rail – simply turn the pointer to show the exact cutting depth.
For bevel cuts, the angle setting is fixed in two locations with half a turn of a single locking screw.

The idea of developing a new plunge-cut saw is not new in itself. The novel aspect of this...mehr

Menü schließen

The idea of developing a new plunge-cut saw is not new in itself. The novel aspect of this development, however, was the origination of a unique precision product from a set of especially designed machine components.
The plunge-cut saw MT 55 cc is a jack of all trades. It can execute plunge, parting, bevel and angled cuts with supreme precision and without any tearing.
The scoring function is quickly activated in a single movement. The MT 55 cc then cuts visible edges as cleanly as a stationary machine, even if the splinter guard is worn.
Continuously variable speed for a variety of materials and sawblades.
The cutting depth range has now been extended to 57 mm (2 1/4 in.). Thanks to the innovative tilting system, the options afforded for bevel cuts are practically unlimited as well.

Menü schließen